It's a PUSH type collet are used mainly on turning, CNC, special purpose machines and other, etc.
High clamping accuracy, high speed and construction of high rigidity.
The installation is the same as "Thru-hole power chuck" and they are replaceable with each other. No need to change the "Draw tube".
This is a completely sealed design, which prevents coolant and chips from entering the spindle.
-----------------------------------

The collet used must accord with DIN 6343.

J value is the hole diameter of blank draw nut, K is the maximum thread specification, and it could be customize.
back menu
 
 
  CL CL-A CB/CB-A back menu
Spec.



Model
Plunger stroke mm Max. Chucking Capacity mm Max. D.B. pull kN(kgf) Max. clamping force kN(kgf) Max. speed min-1(r.p.m) I
kg.m2
Weight kg Matching Stell Collet Matching cyl. Max. pressure
Mpa kgf/cm2
Round Hexagon Square
CL-26 4.5 3~26 4~22 4~18 17.6(1800) 37.9(3870) 8000 0.040 4.3 161E TK-533 2.6(26)
CL-30 3~30 4~26 4~20 19.6(2000) 42.1(4300) 0.038 4.2 163E 2.9(29)
CL-36 6 3~36 6~32 6~26 22.5(2300) 48.5(4950) 6000 0.062 7.0 171E TK-643 2.5(25)
CL-42 3~42 6~36 6~29 24.5(2500) 52.9(5400) 0.060 6.9 173E 2.9(29)
CL-52 5~52 8~45 7~36 27.4(2800) 59.0(6020) 0.101 14.3 177E TK-852 2.3(23)
CL-6017 5~60 8~52 7~42 29.4(3000) 63.7(6500) 5000 0.098 14.1 185E TK-1068 1.8(18)
CL-6022
0.126 16.3
CL-80 20~80 18~69 15~56 34.3(3500) 71.5(7300) 4000 0.108 17.8 193E TK-1287 1.6(16)
 
 
 
 
top

229 Minsheng Rd., Sec. 1, Puhsin Hsiang, Changhua Hsien,Taiwan
T:04-822-8719 / F:04-823-5719 / E-mail:sales@autogrip.com.tw