| |
|
|
| |
|
| • |
It's a DRAW type collet are used mainly on turning, CNC, special purpose machines and other, etc. |
| • |
High clamping accuracy, high speed and construction of high rigidity. |
| • |
The installation is the same as "thru-hole power chuck" and they are replaceable with each other, no need to change the "Draw tube". |
| • |
This is a completely sealed design, which prevents coolant and chips from entering the spindle. |
----------------------------------- |
| • |
J value is the hole diameter of blank draw nut, K is the maximum thread specification, and it could be customize. |
|
  |
|
| |
|
|
 |
|
|
Plunger stroke mm |
Max. Chucking Capacity mm |
Max. D.B. pull kN(kgf) |
Max. clamping force kN(kgf) |
Max. speed min-1(r.p.m) |
I
kg.m2 |
Weight kg |
Matching Stell Collet |
Matching cyl. |
Max. pressure
Mpa kgf/cm2 |
| Round |
Square |
Hexagon |
| CB-42 |
4.5 |
4~42 |
7~30 |
7~32 |
34.3(3500) |
78.4(8000) |
7000 |
0.025 |
6.5 |
GT42 |
TK846 |
2.8(28) |
| CB-42A5 |
0.058 |
6.2 |
| CB-42A6 |
0.061 |
7.4 |
| CB-65 |
5~65 |
8~46 |
10~50 |
44.1(4500) |
103(10500) |
5500 |
0.098 |
15.0 |
GT65 |
TK1068 |
3.0(30) |
| CB-65A6 |
0.091 |
13.6 |
| CB-65A8 |
0.106 |
17.6 |
|
|
| |
|
|
|
|
