| |
|
|
| |
|
| • |
It's a WEDGE-HOOK type 2-jaw with the large through-hole. |
| • |
Matching surfaces of all parts hardened, ground and lubricated directly. |
| • |
Construction of high rigidity and high clamping accuracy. |
----------------------------------- |
| • |
J value is the hole diameter of blank draw nut, K is the maximum thread specification, and it could be customize. |
|
  |
|
| |
|
|
 |
 |
|
Plunger stroke mm |
Jaw stroke(Dia.) mm |
Chucking Dia. mm |
Max. D.B. pull kN(kgf) |
Max. clamping force kN(kgf) |
Max. speed min-1(r.p.m) |
I
kg.m2 |
Weight kg |
Matching cyl. |
Max. pressure
Mpa kgf/cm2 |
| Max. |
Min. |
| 2H-04 |
|
10 |
5.4 |
110 |
7 |
9.2(940) |
18.9(1930) |
8000 |
0.01 |
3.8 |
TH-536 |
1.6(16) |
| 2H-05 |
A4 |
135 |
12 |
11.7(1190) |
23.9(2440) |
7000 |
0.02 |
6.5 |
7.3 |
2.0(20) |
| 2H-06 |
A5 |
12 |
5.5 |
168 |
15 |
14.4(1470) |
37.9(3870) |
6000 |
0.06 |
11.5 |
13.3 |
TH-646 |
1.9(19) |
| 2H-08 |
A5 |
16 |
7.4 |
210 |
13 |
23.1(2360) |
57.2(5840) |
5000 |
0.17 |
21.3 |
24.2 |
TH-852 |
1.9(19) |
| A6 |
22.4 |
| 2H-10 |
A6 |
19 |
8.8 |
254 |
31 |
28.4(2900) |
73.9(7540) |
4200 |
0.31 |
33.5 |
40.5 |
TH-1075 |
1.8(18) |
| A8 |
39 |
| 2H-12 |
A8 |
23 |
10.6 |
304 |
34 |
36.7(3740) |
95.8(9780) |
3300 |
0.70 |
59.7 |
62.7 |
TH-1291 |
1.8(18) |
| 2H-15 |
A8 |
381 |
50 |
46.9(4790) |
119.6(12200) |
2500 |
2.42 |
115 |
129 |
TH-1512 |
1.7(17) |
| A11 |
2.34 |
122 |
|
| ◎ The dimensions and the specifications of 2H-A type are in the red data. |
|
| |
|
|
|
|
